Plasma

Description
Plasma cutting is an efficient and economical method for cutting and shaping conductive materials such as stainless steel and nickel alloys. The process uses a plasma jet, a highly ionized, high-temperature gas created by an electrical arc, which is forced through a small nozzle at high speed. This melts and cleanly cuts the metal using a stream of compressed air, making it a key process in industrial and metal fabrication.
This method offers many advantages, including the ability to work with sheets of various thicknesses, from thin sheets to thicker plates up to 6 inches.
As the plasma flow contacts the metal, it heats it to its melting point, and the molten material is blown away by the high-velocity plasma stream. This process, repeated along the cutting path, produces a narrow kerf with cleanly removed molten metal. CNC plasma cutting machines precisely control the path of the plasma stream, enabling accurate and intricate cuts. Modern high-definition plasma systems deliver clean, sharp edges and minimize the need for finishing operations such as deburring, making them ideal for producing ready-to-use cut pieces.
We offer a full range of solutions, including all plasma cut pieces, plasma cutting stainless steel, and plasma cutting nickel alloys.
| PLASMA | ||||||
|---|---|---|---|---|---|---|
| 156″ x 500″ max size | ||||||
| THK | Standard | |||||
| .1875″ ≤ 1.50″ | +/-.0625″ | |||||
| >1.50″ ≤ 2.00″ | +/-.125″ | |||||
| >2.00″ ≤ 4.00″ | +/-.25″ | |||||
| >4.00″ ≤ 6.00″ | +/-.375″ | |||||
| Bevel | 0°-59° | |||||
| Max Thk. | 6″ | |||||
| Max Width | 120″ | |||||
| Max Length | 480″ | |||||
| Bevel Tolerance | +/- 2° | |||||
Cost
Lower cost than waterjet, laser or saw cutting.
Shapes
Can be used to cut rings, disks and other shapes.
Speed
Quick turn around times and typically shorter lead-times.
Heat Affected Zone
Very high temperatures create a heat affected zone around the cut surfaces. Should be removed by secondary processes.
Cut quality & Tolerances
Small holes and 3D geometry are not available with Plasma cutting. Waterjet and Laser is the alternative.
Heat Sensitive Grades
400 series and PH grades have limitations.
